SKU: 97673097810
darimo carbon sattelstütze

darimo carbon sattelstütze Darimo

Sale price$21.48 Regular price$23.87
Save 10%

Pay in installments of $5.97 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Nov 20 - Nov 25

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

darimo carbon sattelstütze DarimoDarimo Carbon Seatpost for Pinarello F8 F10 F12 Prince The Pinarello F8, F10 and F12 were halo bikes of their era. The newer D shaped Prince follows the same aero lineage. But the stock finishing kit especially the seatpost was never built with weight as the priority. This Darimo replacement removes serious grams from high on the chassis and sharpens the entire build. Typical build weight lands in the 95110g range depending on length dramatically

Darimo Carbon Seatpost for Pinarello F8 / F10 / F12 / Prince

The Pinarello F8, F10 and F12 were halo bikes of their era.

The newer D-shaped Prince follows the same aero lineage.

But the stock finishing kit - especially the seatpost - was never built with weight as the priority.

This Darimo replacement removes serious grams from high on the chassis and sharpens the entire build.

Typical build weight lands in the 95–110g range depending on length - dramatically lighter than most OEM F-series and Prince aero posts.

Handmade in Spain from ultra-high-modulus carbon, this is a purpose-built aero seatpost made specifically for Pinarello’s D-shaped platform.


Why Upgrade?

  • Revitalises an older halo build with modern weight savings
  • Significant weight reduction high on the bike
  • Platform-specific fit for D-shaped Pinarello aero seat tubes
  • No excess material. No unnecessary bulk.

Compatibility

Fits:

  • Pinarello F8
  • Pinarello F10
  • Pinarello F12
  • Pinarello Prince (D-shaped aero models only)

Does NOT fit round 31.6mm Prince models.


Important Installation Notes

  • Darimo seatposts are not designed to be cut. Cutting may compromise structural integrity.
  • Use correct torque settings as specified by Pinarello.
  • If unsure about fitment, confirm your current seatpost profile before ordering.

Most OEM F-series and D-shaped Prince seatposts are substantially heavier than the Darimo. Depending on length, riders typically remove well over 100g from high on the bike — noticeable both on the scale and in the overall feel of the build.

No. This fits the newer D-shaped aero Prince models only. It does not fit older Prince frames that use a round 31.6mm seatpost. If unsure, remove your current post and confirm the profile before ordering.

No. Darimo seatposts are engineered with minimal material to achieve extremely low weight. Cutting the post can compromise structural integrity and is not recommended.

Darimo produces posts in different layups depending on rider weight. If required, a reinforced layup can be specified at time of order.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 97673097810

Discover Niche Categories That Outsell darimo carbon sattelstütze

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 22 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Miguel
Grantham, US
★★★★★ 5
Great wiring harness for light installations.
Size: 16AWG Wiring Harness-2 Leads, Size: 16AWG Wiring Harness-2 Leads
This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2020
M
Verified Purchase
Marina De Leon
Houston, US
★★★★★ 5
Nice
Size: 16AWG Wiring Harness-2 Leads
Worked great, easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2026
D
Verified Purchase
Dan from Georgia
Alexandria, US
★★★★★ 4
Wire length between the two connectors is short for a full-size pickup
Size: 16AWG Wiring Harness-2 Leads
I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2025
N
Verified Purchase
Nate Higgers
Battle Creek, US
★★★★★ 5
great value
Size: 16AWG Wiring Harness-2 Leads
very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
L
Verified Purchase
Lee Mintz
Whiting, US
★★★★★ 5
The Easiest!
Size: 16AWG Wiring Harness-2 Leads
This is one of the best and easiest wiring system to install that I have every used. And the price is great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2025

recommand products